Cappucino Fusion Finishing Oil 237ml

Stain and Finishing Oil (SFO) can be used over larger surfaces to increase protection and the sheen, the more coats you apply the more increase in sheen will occur.

Using over Fusion™ Mineral Paint to increase the sheen, depth of colour and durability simply buff on a very thin amount of the Natural (clear). 

Using pigmented SFO can act as an antiquing glaze which adds age and character.

Over larger painted surfaces the SFO needs to be applied in thin amounts and buffed on. Applying in long strokes from end to end can result in lines or streaks. Over tabletops for example you should apply the SFO in circular motions and ensure the excess is removed. You are aiming for the thinnest, even application possible.

Directions:

How To Use on Bare Wood: pour or brush onto evenly sanded surface, remove excess after 15-20 minutes. If desired, add a second coat after re-coat time for deeper colour or more sheen. The pigment in it stains your wood accentuating the grain. SFO is a combination of natural oils and resins that penetrates wood fibres to create a durable, scratch-resistant, waterproof finish. It does not leave a surface film that sits on top, but instead soaks into and becomes a part of your wood.

If applying over Fusion Mineral Paint, remove excess immediately.

Benefits:

Use the Natural colour over Fusion Mineral Paint™ colours to increase the sheen and offer superior durability, or brush on one of the pigmented colours and wipe off immediately for a beautiful, easy glaze effect. Our special blend is highly concentrated in pigment, so a little goes a long way. The 237 mL container will cover the same area as 1 litre of comparable stains.

Application Tool:  Brush, lint free rag, applicator pad

Location:   Interior

Re-coat Time:  9 hrs

Top Coat:  No additional top coat is required. This is made strong enough for floors and table tops. However, you may use wax or "Natural" colour Stain & Finishing Oil to increase the sheen but not deepen the colour. 

Clean Up:  Turpentine

Coverage:  4 – 7 sq. metres

Finish/Sheen:  Matte to high sheen. Each additional layer and buffing increases the sheen. 

Recommended Uses:   Reclaimed wood, bare wood, tabletops, floors, most any surface, painted finish or Milk Painted pieces. 

Can Be Applied To:   Use as a stain over raw or well-sanded wood; apply over painted surface for added sheen, glaze effect, or added protection; seal milk paint or other porous paint. Not recommended over light colours as it will yellow.

Can Be Painted Over:  Once dried if over bare wood and only 1 coat applied, 10 days after for multiple coats applied. Test to ensure prior to tackling a full project.

How to Prep:   Apply over any surface or top coat for desired effect except wax.

Cure Time:  10 Days

Maintenance/ Cleaning:   Light cleaners, as they will strip away the natural oil.